Contact
Tel: +49 711 45894-600
E-Mail: sales(at)ads-tec.de
ads-tec Industrial Wireless Lan (IWL) - the optimal solution to establish a reliable WLAN infrastructure for the industrial environment. If you want to avoid expensive cable networks or if you wish to connect mobile users, the IWL is the most efficient option for stable connections with highest transmission rates under unfavourable conditions. The robust design allows operation outdoor as well as in a harsh environment or even on vehicles.
IWL3000 series Universally deployable
• IEEE 802.11n, a/h, b/g available in one device
• 1 or 2 radio modules 2.4 and 5 GHz
(can be configured individually)
• Rugged magnesium die-cast case IP 20
• Shock- and vibration-proof, no rotating parts
• Environmental temperature -20°C to +70°C
• 24 V multi-voltage power supply for a
supply voltage of 6..36 V DC
• 2 x GBit Ethernet Cu (RJ45) 10/100/1000
• Daisy-chain cabling possible
• 1x USB 2.0
• SIM card reader fitted into the back
(configuration backup) Display and keypad
High Performance One or two WLAN Modules
• 802.11n for a maximum data rate of up to 900 MBit/s raw if
using two interfaces
• Transparent for all Ethernet-based (IEEE 802.3) protocols,
even real time Ethernet
• Can be switched between access point or client mode with
seamless roaming in case of 2 radio modules
• Multi SSID permits up to 2 x 8 virtual access point
instances with different configuration
• MIMO 3x3 with three antenna connectors
• WPS - Wireless protected setup available
at the push of a button
Options Always with a suitable accessory
• 3 x antenna connectors per radio module RP-TNC
• Antenna kits and antenna extension cables
available optionally
• Third-party antennas can be connected
• SIM cards for configuration storage
• IDA light – free management software for the
configuration of several RAP/RAC/IWL
Installation options Optimized for installation in
switching cabinets
• Slim housing for minimum space requirement
in the cabinet
• Dimensions about 192 x 134 x 35 mm
• Antennas may be placed apart outside
the switching cabinet
• Top-hat rail or VESA 75 installation
• Operation from table via stands
VLAN tagging, QoS and prioritisation Strictly in the right order
• Machine protocols have preference
• Real time Ethernet applications can easily be used in
combination with VLANs
• Even networks under high loads can securely convey important
data thanks to the QoS feature
Event log and monitoring Always informed about what‘s going on
• Password protected event log with local or remote data retrieval
• Event log transmission to a SNMP server
(SNMPv1, SNMPv2, SNMPv3)
• Client monitoring for supervision of TCP/IP terminals
WLAN monitoring mode Opportunities for professional analysis
• Operation in monitoring mode allows WLAN protocol analysis
by using Wireshark on an 802.11 level
• This way, you can perform in-depth analyses on site without
having to use any additional WLAN analysis tools
IDA light administration tool Central administration
Tool for centralised administration of access clients and
access points in a network
• Automatic detection in corporate networks
• Centralised IP assignment
• Centralised firmware updating
• Allocation to groups and creation of firewall rules can be
copied per drag & drop
• To be downloaded for free on ads-tec website
Network functions Routing and real
time Ethernet
• Operation in IP router mode or as a
transparent bridge (layer 2)
• Fully compatible with 802.11e and real
time Ethernet protocols
• Definition of up to 10 static routes, as
well as dynamic routing acc.
to RIPv2 and OSPF
Integrated firewall Filtering on layer 2
and layer 3
• Predefined filter rules and rulesets e.g.
for POP3, ModbusTCP or Profinet
• Filter wizard for simplified creation of
your own rules
Configuration via web interface Simple
control and configuration
• All functions of RAP, RAC and IWL can
be configured via the web interface
• Interface is secured with https and
certificates
• Online help and plausibility checks for
all important parameters in order to
avoid errors in the configuration
